I have so much fun with Leighanna Light’s techniques that I decided to take both of her classes at FOBA this year. I took a break on Friday because I have finally learned that I cannot go full charge for five days at an art retreat without falling apart before the end. Kathy went home. So that was the day I roamed around town by myself and took photos. Susanne and I sent three boxes full of stuff that we bought or no longer needed for classes back home by Priority Mail. I repacked everything and left the suitcase with one wheel in the garbage can.

On Saturday, Judy joined my class, so it was nice to reconnect with her. She gave me an accordion flag style book she made with her handmade paper and photos she took of the textures at Yellowstone National Park. Such a nice memento of our time together there. I’ll post a photo later. Also sitting at our table was Virginia Sumner, attending her first art retreat. She was kind enough to give us a ride back to the MAX line station so that we didn’t have to lug bags too far. You can check out Virginia’s artwork here. I love making new friends at art retreats, even though I didn’t try very hard at this one.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

phototransfer

^^^On Saturday morning we concentrated on the techniques that would have to dry for a while. The first thing we did was make gesso photo transfers on metal. It’s a very simple technique but I always have problems with any kind of photo transfer. I think that I will try to rub a little more paper off.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

FOBA - Leighanna Light's Surface Design on Metal and Paper class

^^^I had some extra tin so I played with gesso and stencils again.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

FOBA - Leighanna Light's Surface Design on Metal and Paper class

^^^We went out and picked leaves to do leaf prints on copper and brass. This is a technique that Leighanna developed. The brass turned the copper a bluish color where they were stacked – or was it the copper turned the brass blue – aw heck, I’m mixed up, but it was cool. I think that the brass is the bigger piece.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

FOBA - Leighanna Light's Surface Design on Metal and Paper class

^^^We spent the afternoon painting and stenciling and stamping watercolor paper with gesso, let them dry, then painted over them with dyes and chalk paint. I could do this for weeks and I don’t know why I don’t do it more when I am at home. I am resistant to getting paint on my hands and I hate gloves so I guess that is it, but if I am somewhere else in a workshop I am happy slapping wet stuff on paper and getting it all over me. I kept going back and adding more color here and there.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

^^^The following day we tore our papers into signatures and bound them into a book with a canvas cover with a longstitch binding. I can make three more books with the extra signatures I made.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

^^^Then came the tough decision – what metal plate to use on the cover? I would have been fine with several of these. It helped to cut down the leaf prints into smaller sections. Once I did that, one stood out and I went with it.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

FOBA - Leighanna Light's Surface Design on Metal and Paper class

We attached the metal with a metal punch and little nuts and bolts. I originally bound the book with red thread to give it a pop, but after I attached the plate I rebound it with black thread. Part of the look was to hang ribbons and yarns and odd bits to the threads hanging off the spine. I like that kind of thing, but I didn’t go for it with either of my books. I preferred the simple look of the plain black thread on the spine, so I brought the ends of the threads to the inside as in a pamphlet binding.

FOBA - Leighanna Light's Surface Design on Metal and Paper class

FOBA - Leighanna Light's Surface Design on Metal and Paper class

I still need to glue the back and front papers to the cover, but I’m very happy with the results I had in both workshops. I don’t expect to come home with something that I am so satisfied with, because the idea is that I am learning and playing, so this was great.

Susanne and I flew back on the redeye from Portland to Greensboro late that night. PDX is a great airport, with good shops and restaurants at normal prices. I end this series with the amazing banh mi from Bambuza Vietnam Kitchen, which I washed down with a “Made Marion” marionberry cider from 2 Towns Ciderhouse. I will miss the food and drinks in Oregon.

Bahn Mi at PDX